How to Check SSD Read and Write Speeds on Windows 10 Free

How to Check SSD Read and Write Speeds on Windows 10 Free on Laptop/PC

On Windows 10, the Task Manager can give you a snapshot of the current read/write speed for your disk. It works regardless if you're using an SSD or an HDD. To use the Task Manager to find the read/write speed of an SSD, you need to first find a large file, preferably 1GB.

How do I know if my laptop has SSD?

Simply press the Windows key + R keyboard shortcut to open the Run box, type "dfrgui" and press Enter. When the Disk Defragmenter window is shown, look for the Media type column and you can find out which drive is a solid-state drive (SSD), and which one is a hard disk drive (HDD).

How do you test the read-write speed of a SSD?

CrystalDiskMark is a small HDD benchmark utility for your hard drive that enables you to rapidly measure sequential and random read/write speeds. It measure sequential reads/writes speed,measure random 512KB, 4KB, 4KB (Queue Depth=32) reads/writes speed,select test data (Random, 0Fill, 1Fill).

How do I check my disk read write speed Windows 10? You can check this video.

Download CrystalDiskMark Software for free 

CrystalDiskMark is an open-source disk drive benchmark tool for Microsoft Windows. Based on Microsoft's MIT-licensed Diskspd tool, this graphical benchmark is commonly used for testing the performance of solid-state storage. It works by reading and writing through the filesystem in a volume-dependent way.

Can SSD read and write at the same time?

No. They share a common IO channel, so they can only do one or the other. But with that said, there are memory controllers that can buffer the simultaneous read/write's but at the drive level, this is still single-threaded, like the NVMe drives connected directly to the PCI bus.

Alternative 2021 Article ➤ 5 Free SSD Optimizer To Boost Speed, Performance And Increase Lifespan 2021

How do I know if my SSD is working properly?

Check HDD/SSD failures with chkdsk

1. Boot into your Windows.
2. Click Start.
3. Go to the Computer.
4. Right-click on the main drive you want to check.
5. Click Properties.
6. At the Tools tab, click Get started at the Error-checking section.
7. Check the Automatically fix file system errors checkbox.
8. Click Start.